UnsafeMutableBufferPointer

struct UnsafeMutableBufferPointer<Element>

A non-owning collection interface to a buffer of mutable elements stored contiguously in memory.

You can use an UnsafeMutableBufferPointer instance in low level operations to eliminate uniqueness checks and, in release mode, bounds checks. Bounds checks are always performed in debug mode.

UnsafeMutableBufferPointer Semantics

An UnsafeMutableBufferPointer instance is a view into memory and does not own the memory that it references. Copying a value of type UnsafeMutableBufferPointer does not copy the instances stored in the underlying memory. However, initializing another collection with an UnsafeMutableBufferPointer instance copies the instances out of the referenced memory and into the new collection.

See Also: UnsafeMutablePointer, UnsafeMutableRawBufferPointer

Inheritance BidirectionalCollection, Collection, CustomDebugStringConvertible, MutableCollection, RandomAccessCollection, Sequence View Protocol Hierarchy →
Associated Types
Index = Int

A type that represents a position in the collection.

Valid indices consist of the position of every element and a "past the end" position that's not valid for use as a subscript argument.

See Also: endIndex

IndexDistance = Int

A type that represents the number of steps between two indices, where one value is reachable from the other.

In Swift, reachability refers to the ability to produce one value from the other through zero or more applications of index(after:).

Iterator = IndexingIterator<UnsafeMutableBufferPointer<Element>>

A type that provides the collection's iteration interface and encapsulates its iteration state.

By default, a collection conforms to the Sequence protocol by supplying IndexingIterator as its associated Iterator type.

Indices = CountableRange<Int>

A type that represents the indices that are valid for subscripting the collection, in ascending order.

Element = Element

Type alias inferred.

Index = Int

Type alias inferred.

SubSequence = MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Type alias inferred.

Import import Swift

Initializers

init(start:count:)

Creates a new buffer pointer over the specified number of contiguous instances beginning at the given pointer.

Parameters: start: A pointer to the start of the buffer, or nil. If start is nil, count must be zero. However, count may be zero even for a non-nil start. The pointer passed as start must be aligned to MemoryLayout<Element>.alignment. count: The number of instances in the buffer. count must not be negative.

Declaration

init(start: UnsafeMutablePointer<Element>?, count: Int)

Instance Variables

var baseAddress: UnsafeMutablePointer<Element>?

A pointer to the first element of the buffer.

If the baseAddress of this buffer is nil, the count is zero. However, a buffer can have a count of zero even with a non-nil base address.

Declaration

var baseAddress: UnsafeMutablePointer<Element>? { get }
var count: Int

The number of elements in the buffer.

If the baseAddress of this buffer is nil, the count is zero. However, a buffer can have a count of zero even with a non-nil base address.

Declaration

var count: Int { get }
var debugDescription: String

A textual representation of the buffer, suitable for debugging.

Declaration

var debugDescription: String { get }
var endIndex: Int

The "past the end" position---that is, the position one greater than the last valid subscript argument.

The endIndex property of an UnsafeMutableBufferPointer instance is always identical to count.

Declaration

var endIndex: Int { get }
var first: Element?

The first element of the collection.

If the collection is empty, the value of this property is nil.

let numbers = [10, 20, 30, 40, 50]
if let firstNumber = numbers.first {
    print(firstNumber)
}
// Prints "10"

Declaration

var first: Element? { get }

Declared In

MutableCollection , RandomAccessCollection , Collection , BidirectionalCollection
var indices: UnsafeMutableBufferPointer.Indices

The indices that are valid for subscripting the collection, in ascending order.

A collection's indices property can hold a strong reference to the collection itself, causing the collection to be nonuniquely referenced. If you mutate the collection while iterating over its indices, a strong reference can result in an unexpected copy of the collection. To avoid the unexpected copy, use the index(after:) method starting with startIndex to produce indices instead.

var c = MyFancyCollection([10, 20, 30, 40, 50])
var i = c.startIndex
while i != c.endIndex {
    c[i] /= 5
    i = c.index(after: i)
}
// c == MyFancyCollection([2, 4, 6, 8, 10])

Declaration

var indices: UnsafeMutableBufferPointer.Indices { get }
var isEmpty: Bool

A Boolean value indicating whether the collection is empty.

When you need to check whether your collection is empty, use the isEmpty property instead of checking that the count property is equal to zero. For collections that don't conform to RandomAccessCollection, accessing the count property iterates through the elements of the collection.

let horseName = "Silver"
if horseName.characters.isEmpty {
    print("I've been through the desert on a horse with no name.")
} else {
    print("Hi ho, \(horseName)!")
}
// Prints "Hi ho, Silver!")

Complexity: O(1)

Declaration

var isEmpty: Bool { get }

Declared In

MutableCollection , RandomAccessCollection , Collection , BidirectionalCollection
var last: Element?

The last element of the collection.

If the collection is empty, the value of this property is nil.

let numbers = [10, 20, 30, 40, 50]
if let lastNumber = numbers.last {
    print(lastNumber)
}
// Prints "50"

Declaration

var last: Element? { get }

Declared In

RandomAccessCollection , BidirectionalCollection
var lazy: LazyCollection<UnsafeMutableBufferPointer<Element>>

A view onto this collection that provides lazy implementations of normally eager operations, such as map and filter.

Use the lazy property when chaining operations to prevent intermediate operations from allocating storage, or when you only need a part of the final collection to avoid unnecessary computation.

See Also: LazySequenceProtocol, LazyCollectionProtocol.

Declaration

var lazy: LazyCollection<UnsafeMutableBufferPointer<Element>> { get }

Declared In

MutableCollection , Collection
var startIndex: Int

The index of the first element in a nonempty buffer.

The startIndex property of an UnsafeMutableBufferPointer instance is always zero.

Declaration

var startIndex: Int { get }
var underestimatedCount: Int

A value less than or equal to the number of elements in the collection.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(n), where n is the length of the collection.

Declaration

var underestimatedCount: Int { get }

Declared In

MutableCollection , RandomAccessCollection , Collection , BidirectionalCollection , Sequence

Subscripts

subscript(_: Int)

Accesses the element at the specified position.

The following example uses the buffer pointer's subscript to access and modifying the elements of a mutable buffer pointing to the contiguous contents of an array:

var numbers = [1, 2, 3, 4, 5]
numbers.withUnsafeMutableBufferPointer { buffer in
    for i in stride(from: buffer.startIndex, to: buffer.endIndex - 1, by: 2) {
        let x = buffer[i]
        buffer[i + 1] = buffer[i]
        buffer[i] = x
    }
}
print(numbers)
// Prints "[2, 1, 4, 3, 5]"

Note: Bounds checks for i are performed only in debug mode.

i: The position of the element to access. i must be in the range 0..<count.

Declaration

subscript(i: Int) -> Element { get nonmutating set }
subscript(_: Range<Int>)

Accesses the subsequence bounded by the given range.

bounds: A range of the collection's indices. The upper and lower bounds of the range must be valid indices of the collection.

Complexity: O(1)

Declaration

subscript(bounds: Range<Int>) -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

UnsafeMutableBufferPointer, MutableCollection

Instance Methods

func contains(where:)

Returns a Boolean value indicating whether the sequence contains an element that satisfies the given predicate.

You can use the predicate to check for an element of a type that doesn't conform to the Equatable protocol, such as the HTTPResponse enumeration in this example.

enum HTTPResponse {
    case ok
    case error(Int)
}

let lastThreeResponses: [HTTPResponse] = [.ok, .ok, .error(404)]
let hadError = lastThreeResponses.contains { element in
    if case .error = element {
        return true
    } else {
        return false
    }
}
// 'hadError' == true

Alternatively, a predicate can be satisfied by a range of Equatable elements or a general condition. This example shows how you can check an array for an expense greater than $100.

let expenses = [21.37, 55.21, 9.32, 10.18, 388.77, 11.41]
let hasBigPurchase = expenses.contains { $0 > 100 }
// 'hasBigPurchase' == true

predicate: A closure that takes an element of the sequence as its argument and returns a Boolean value that indicates whether the passed element represents a match. Returns: true if the sequence contains an element that satisfies predicate; otherwise, false.

Declaration

func contains(where predicate: (Element) throws -> Bool) rethrows -> Bool

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func distance(from:to:)

Returns the distance between two indices.

Unless the collection conforms to the BidirectionalCollection protocol, start must be less than or equal to end.

Parameters: start: A valid index of the collection. end: Another valid index of the collection. If end is equal to start, the result is zero. Returns: The distance between start and end. The result can be negative only if the collection conforms to the BidirectionalCollection protocol.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(n), where n is the resulting distance.

Declaration

func distance(from start: Int, to end: Int) -> Int
func drop(while:)

Returns a subsequence by skipping elements while predicate returns true and returning the remaining elements.

predicate: A closure that takes an element of the sequence as its argument and returns true if the element should be skipped or false if it should be included. Once the predicate returns false it will not be called again.

Complexity: O(n), where n is the length of the collection.

Declaration

func drop(while predicate: (Element) throws -> Bool) rethrows -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection
func dropFirst()

Returns a subsequence containing all but the first element of the sequence.

The following example drops the first element from an array of integers.

let numbers = [1, 2, 3, 4, 5]
print(numbers.dropFirst())
// Prints "[2, 3, 4, 5]"

If the sequence has no elements, the result is an empty subsequence.

let empty: [Int] = []
print(empty.dropFirst())
// Prints "[]"

Returns: A subsequence starting after the first element of the sequence.

Complexity: O(1)

Declaration

func dropFirst() -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func dropFirst(_:)

Returns a subsequence containing all but the given number of initial elements.

If the number of elements to drop exceeds the number of elements in the collection, the result is an empty subsequence.

let numbers = [1, 2, 3, 4, 5]
print(numbers.dropFirst(2))
// Prints "[3, 4, 5]"
print(numbers.dropFirst(10))
// Prints "[]"

n: The number of elements to drop from the beginning of the collection. n must be greater than or equal to zero. Returns: A subsequence starting after the specified number of elements.

Complexity: O(n), where n is the number of elements to drop from the beginning of the collection.

Declaration

func dropFirst(_ n: Int) -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection
func dropLast()

Returns a subsequence containing all but the last element of the sequence.

The sequence must be finite.

let numbers = [1, 2, 3, 4, 5]
print(numbers.dropLast())
// Prints "[1, 2, 3, 4]"

If the sequence has no elements, the result is an empty subsequence.

let empty: [Int] = []
print(empty.dropLast())
// Prints "[]"

Returns: A subsequence leaving off the last element of the sequence.

Complexity: O(n), where n is the length of the sequence.

Declaration

func dropLast() -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func dropLast(_:)

Returns a subsequence containing all but the specified number of final elements.

If the number of elements to drop exceeds the number of elements in the collection, the result is an empty subsequence.

let numbers = [1, 2, 3, 4, 5]
print(numbers.dropLast(2))
// Prints "[1, 2, 3]"
print(numbers.dropLast(10))
// Prints "[]"

n: The number of elements to drop off the end of the collection. n must be greater than or equal to zero. Returns: A subsequence that leaves off the specified number of elements at the end.

Complexity: O(n), where n is the length of the collection.

Declaration

func dropLast(_ n: Int) -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection
func elementsEqual(_:by:)

Returns a Boolean value indicating whether this sequence and another sequence contain equivalent elements, using the given predicate as the equivalence test.

At least one of the sequences must be finite.

The predicate must be a equivalence relation over the elements. That is, for any elements a, b, and c, the following conditions must hold:

  • areEquivalent(a, a) is always true. (Reflexivity)
  • areEquivalent(a, b) implies areEquivalent(b, a). (Symmetry)
  • If areEquivalent(a, b) and areEquivalent(b, c) are both true, then areEquivalent(a, c) is also true. (Transitivity)

Parameters: other: A sequence to compare to this sequence. areEquivalent: A predicate that returns true if its two arguments are equivalent; otherwise, false. Returns: true if this sequence and other contain equivalent items, using areEquivalent as the equivalence test; otherwise, false.

See Also: elementsEqual(_:)

Declaration

func elementsEqual<OtherSequence where OtherSequence : Sequence, Element == OtherSequence.Iterator.Element>(_ other: OtherSequence, by areEquivalent: (Element, Element) throws -> Bool) rethrows -> Bool

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func enumerated()

Returns a sequence of pairs (n, x), where n represents a consecutive integer starting at zero, and x represents an element of the sequence.

This example enumerates the characters of the string "Swift" and prints each character along with its place in the string.

for (n, c) in "Swift".characters.enumerated() {
    print("\(n): '\(c)'")
}
// Prints "0: 'S'"
// Prints "1: 'w'"
// Prints "2: 'i'"
// Prints "3: 'f'"
// Prints "4: 't'"

When enumerating a collection, the integer part of each pair is a counter for the enumeration, not necessarily the index of the paired value. These counters can only be used as indices in instances of zero-based, integer-indexed collections, such as Array and ContiguousArray. For other collections the counters may be out of range or of the wrong type to use as an index. To iterate over the elements of a collection with its indices, use the zip(_:_:) function.

This example iterates over the indices and elements of a set, building a list of indices of names with five or fewer letters.

let names: Set = ["Sofia", "Camilla", "Martina", "Mateo", "Nicolás"]
var shorterIndices: [SetIndex<String>] = []
for (i, name) in zip(names.indices, names) {
    if name.characters.count <= 5 {
        shorterIndices.append(i)
    }
}

Now that the shorterIndices array holds the indices of the shorter names in the names set, you can use those indices to access elements in the set.

for i in shorterIndices {
    print(names[i])
}
// Prints "Sofia"
// Prints "Mateo"

Returns: A sequence of pairs enumerating the sequence.

Declaration

func enumerated() -> EnumeratedSequence<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func filter(_:)

Returns an array containing, in order, the elements of the sequence that satisfy the given predicate.

In this example, filter is used to include only names shorter than five characters.

let cast = ["Vivien", "Marlon", "Kim", "Karl"]
let shortNames = cast.filter { $0.characters.count < 5 }
print(shortNames)
// Prints "["Kim", "Karl"]"

isIncluded: A closure that takes an element of the sequence as its argument and returns a Boolean value indicating whether the element should be included in the returned array. Returns: An array of the elements that includeElement allowed.

Declaration

func filter(_ isIncluded: (Element) throws -> Bool) rethrows -> [Element]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func first(where:)

Returns the first element of the sequence that satisfies the given predicate.

The following example uses the first(where:) method to find the first negative number in an array of integers:

let numbers = [3, 7, 4, -2, 9, -6, 10, 1]
if let firstNegative = numbers.first(where: { $0 < 0 }) {
    print("The first negative number is \(firstNegative).")
}
// Prints "The first negative number is -2."

predicate: A closure that takes an element of the sequence as its argument and returns a Boolean value indicating whether the element is a match. Returns: The first element of the sequence that satisfies predicate, or nil if there is no element that satisfies predicate.

Declaration

func first(where predicate: (Element) throws -> Bool) rethrows -> Element?

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func flatMap<ElementOfResult>(_: (Element) throws -> ElementOfResult?)

Returns an array containing the non-nil results of calling the given transformation with each element of this sequence.

Use this method to receive an array of nonoptional values when your transformation produces an optional value.

In this example, note the difference in the result of using map and flatMap with a transformation that returns an optional Int value.

let possibleNumbers = ["1", "2", "three", "///4///", "5"]

let mapped: [Int?] = possibleNumbers.map { str in Int(str) }
// [1, 2, nil, nil, 5]

let flatMapped: [Int] = possibleNumbers.flatMap { str in Int(str) }
// [1, 2, 5]

transform: A closure that accepts an element of this sequence as its argument and returns an optional value. Returns: An array of the non-nil results of calling transform with each element of the sequence.

Complexity: O(m + n), where m is the length of this sequence and n is the length of the result.

Declaration

func flatMap<ElementOfResult>(_ transform: (Element) throws -> ElementOfResult?) rethrows -> [ElementOfResult]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func flatMap<SegmentOfResult where SegmentOfResult : Sequence>(_: (Element) throws -> SegmentOfResult)

Returns an array containing the concatenated results of calling the given transformation with each element of this sequence.

Use this method to receive a single-level collection when your transformation produces a sequence or collection for each element.

In this example, note the difference in the result of using map and flatMap with a transformation that returns an array.

let numbers = [1, 2, 3, 4]

let mapped = numbers.map { Array(count: $0, repeatedValue: $0) }
// [[1], [2, 2], [3, 3, 3], [4, 4, 4, 4]]

let flatMapped = numbers.flatMap { Array(count: $0, repeatedValue: $0) }
// [1, 2, 2, 3, 3, 3, 4, 4, 4, 4]

In fact, s.flatMap(transform) is equivalent to Array(s.map(transform).joined()).

transform: A closure that accepts an element of this sequence as its argument and returns a sequence or collection. Returns: The resulting flattened array.

Complexity: O(m + n), where m is the length of this sequence and n is the length of the result. See Also: joined(), map(_:)

Declaration

func flatMap<SegmentOfResult where SegmentOfResult : Sequence>(_ transform: (Element) throws -> SegmentOfResult) rethrows -> [SegmentOfResult.Iterator.Element]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func forEach(_:)

Calls the given closure on each element in the sequence in the same order as a for-in loop.

The two loops in the following example produce the same output:

let numberWords = ["one", "two", "three"]
for word in numberWords {
    print(word)
}
// Prints "one"
// Prints "two"
// Prints "three"

numberWords.forEach { word in
    print(word)
}
// Same as above

Using the forEach method is distinct from a for-in loop in two important ways:

  1. You cannot use a break or continue statement to exit the current call of the body closure or skip subsequent calls.
  2. Using the return statement in the body closure will exit only from the current call to body, not from any outer scope, and won't skip subsequent calls.

body: A closure that takes an element of the sequence as a parameter.

Declaration

func forEach(_ body: (Element) throws -> Swift.Void) rethrows

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func formIndex(after:)

Replaces the given index with its successor.

i: A valid index of the collection. i must be less than endIndex.

See Also: index(after:)

Declaration

func formIndex(after i: inout Int)
func formIndex(before:)

Replaces the given index with its predecessor.

i: A valid index of the collection. i must be greater than startIndex.

Declaration

func formIndex(before i: inout Int)
func index(_:offsetBy:)

Returns an index that is the specified distance from the given index.

The following example obtains an index advanced four positions from a string's starting index and then prints the character at that position.

let s = "Swift"
let i = s.index(s.startIndex, offsetBy: 4)
print(s[i])
// Prints "t"

The value passed as n must not offset i beyond the bounds of the collection.

Parameters: i: A valid index of the collection. n: The distance to offset i. n must not be negative unless the collection conforms to the BidirectionalCollection protocol. Returns: An index offset by n from the index i. If n is positive, this is the same value as the result of n calls to index(after:). If n is negative, this is the same value as the result of -n calls to index(before:).

See Also: index(_:offsetBy:limitedBy:), formIndex(_:offsetBy:) Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(n), where n is the absolute value of n.

Declaration

func index(_ i: Int, offsetBy n: Int) -> Int
func index(_:offsetBy:limitedBy:)

Returns an index that is the specified distance from the given index, unless that distance is beyond a given limiting index.

The following example obtains an index advanced four positions from a string's starting index and then prints the character at that position. The operation doesn't require going beyond the limiting s.endIndex value, so it succeeds.

let s = "Swift"
if let i = s.index(s.startIndex, offsetBy: 4, limitedBy: s.endIndex) {
    print(s[i])
}
// Prints "t"

The next example attempts to retrieve an index six positions from s.startIndex but fails, because that distance is beyond the index passed as limit.

let j = s.index(s.startIndex, offsetBy: 6, limitedBy: s.endIndex)
print(j)
// Prints "nil"

The value passed as n must not offset i beyond the bounds of the collection, unless the index passed as limit prevents offsetting beyond those bounds.

Parameters: i: A valid index of the collection. n: The distance to offset i. n must not be negative unless the collection conforms to the BidirectionalCollection protocol. limit: A valid index of the collection to use as a limit. If n > 0, a limit that is less than i has no effect. Likewise, if n < 0, a limit that is greater than i has no effect. Returns: An index offset by n from the index i, unless that index would be beyond limit in the direction of movement. In that case, the method returns nil.

See Also: index(_:offsetBy:), formIndex(_:offsetBy:limitedBy:) Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(n), where n is the absolute value of n.

Declaration

func index(_ i: Int, offsetBy n: Int, limitedBy limit: Int) -> Int?
func index(after:)

Returns the position immediately after the given index.

The successor of an index must be well defined. For an index i into a collection c, calling c.index(after: i) returns the same index every time.

i: A valid index of the collection. i must be less than endIndex. Returns: The index value immediately after i.

Declaration

func index(after i: Int) -> Int
func index(before:)

Returns the position immediately before the given index.

i: A valid index of the collection. i must be greater than startIndex. Returns: The index value immediately before i.

Declaration

func index(before i: Int) -> Int
func index(where:)

Returns the first index in which an element of the collection satisfies the given predicate.

You can use the predicate to find an element of a type that doesn't conform to the Equatable protocol or to find an element that matches particular criteria. Here's an example that finds a student name that begins with the letter "A":

let students = ["Kofi", "Abena", "Peter", "Kweku", "Akosua"]
if let i = students.index(where: { $0.hasPrefix("A") }) {
    print("\(students[i]) starts with 'A'!")
}
// Prints "Abena starts with 'A'!"

predicate: A closure that takes an element as its argument and returns a Boolean value that indicates whether the passed element represents a match. Returns: The index of the first element for which predicate returns true. If no elements in the collection satisfy the given predicate, returns nil.

See Also: index(of:)

Declaration

func index(where predicate: (Element) throws -> Bool) rethrows -> Int?

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection
func initialize(from:)

Initializes memory in the buffer with the elements of source. Returns an iterator to any elements of source that didn't fit in the buffer, and an index to the point in the buffer one past the last element written (so startIndex if no elements written, endIndex if the buffer was completely filled).

Precondition: The memory in self is uninitialized. The buffer must contain sufficient uninitialized memory to accommodate source.underestimatedCount.

Postcondition: The Pointees at self[startIndex..<returned index] are initialized.

Declaration

func initialize<S where Element == S.Iterator.Element, S : Sequence>(from source: S) -> (S.Iterator, UnsafeMutableBufferPointer.Index)
func lexicographicallyPrecedes(_:by:)

Returns a Boolean value indicating whether the sequence precedes another sequence in a lexicographical (dictionary) ordering, using the given predicate to compare elements.

The predicate must be a strict weak ordering over the elements. That is, for any elements a, b, and c, the following conditions must hold:

  • areInIncreasingOrder(a, a) is always false. (Irreflexivity)
  • If areInIncreasingOrder(a, b) and areInIncreasingOrder(b, c) are both true, then areInIncreasingOrder(a, c) is also true. (Transitive comparability)
  • Two elements are incomparable if neither is ordered before the other according to the predicate. If a and b are incomparable, and b and c are incomparable, then a and c are also incomparable. (Transitive incomparability)

Parameters: other: A sequence to compare to this sequence. areInIncreasingOrder: A predicate that returns true if its first argument should be ordered before its second argument; otherwise, false. Returns: true if this sequence precedes other in a dictionary ordering as ordered by areInIncreasingOrder; otherwise, false.

Note: This method implements the mathematical notion of lexicographical ordering, which has no connection to Unicode. If you are sorting strings to present to the end user, use String APIs that perform localized comparison instead. See Also: lexicographicallyPrecedes(_:)

Declaration

func lexicographicallyPrecedes<OtherSequence where OtherSequence : Sequence, Element == OtherSequence.Iterator.Element>(_ other: OtherSequence, by areInIncreasingOrder: (Element, Element) throws -> Bool) rethrows -> Bool

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func makeIterator()

Returns an iterator over the elements of this buffer.

Returns: An iterator over the elements of this buffer.

Declaration

func makeIterator() -> UnsafeBufferPointerIterator<Element>
func map(_:)

Returns an array containing the results of mapping the given closure over the sequence's elements.

In this example, map is used first to convert the names in the array to lowercase strings and then to count their characters.

let cast = ["Vivien", "Marlon", "Kim", "Karl"]
let lowercaseNames = cast.map { $0.lowercaseString }
// 'lowercaseNames' == ["vivien", "marlon", "kim", "karl"]
let letterCounts = cast.map { $0.characters.count }
// 'letterCounts' == [6, 6, 3, 4]

transform: A mapping closure. transform accepts an element of this sequence as its parameter and returns a transformed value of the same or of a different type. Returns: An array containing the transformed elements of this sequence.

Declaration

func map<T>(_ transform: (Element) throws -> T) rethrows -> [T]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
@warn_unqualified_access func max(by:)

Returns the maximum element in the sequence, using the given predicate as the comparison between elements.

The predicate must be a strict weak ordering over the elements. That is, for any elements a, b, and c, the following conditions must hold:

  • areInIncreasingOrder(a, a) is always false. (Irreflexivity)
  • If areInIncreasingOrder(a, b) and areInIncreasingOrder(b, c) are both true, then areInIncreasingOrder(a, c) is also true. (Transitive comparability)
  • Two elements are incomparable if neither is ordered before the other according to the predicate. If a and b are incomparable, and b and c are incomparable, then a and c are also incomparable. (Transitive incomparability)

This example shows how to use the max(by:) method on a dictionary to find the key-value pair with the highest value.

let hues = ["Heliotrope": 296, "Coral": 16, "Aquamarine": 156]
let greatestHue = hues.max { a, b in a.value < b.value }
print(greatestHue)
// Prints "Optional(("Heliotrope", 296))"

areInIncreasingOrder: A predicate that returns true if its first argument should be ordered before its second argument; otherwise, false. Returns: The sequence's maximum element if the sequence is not empty; otherwise, nil.

See Also: max()

Declaration

@warn_unqualified_access func max(by areInIncreasingOrder: (Element, Element) throws -> Bool) rethrows -> Element?

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func min(by:)

Returns the minimum element in the sequence, using the given predicate as the comparison between elements.

The predicate must be a strict weak ordering over the elements. That is, for any elements a, b, and c, the following conditions must hold:

  • areInIncreasingOrder(a, a) is always false. (Irreflexivity)
  • If areInIncreasingOrder(a, b) and areInIncreasingOrder(b, c) are both true, then areInIncreasingOrder(a, c) is also true. (Transitive comparability)
  • Two elements are incomparable if neither is ordered before the other according to the predicate. If a and b are incomparable, and b and c are incomparable, then a and c are also incomparable. (Transitive incomparability)

This example shows how to use the min(by:) method on a dictionary to find the key-value pair with the lowest value.

let hues = ["Heliotrope": 296, "Coral": 16, "Aquamarine": 156]
let leastHue = hues.min { a, b in a.value < b.value }
print(leastHue)
// Prints "Optional(("Coral", 16))"

areInIncreasingOrder: A predicate that returns true if its first argument should be ordered before its second argument; otherwise, false. Returns: The sequence's minimum element, according to areInIncreasingOrder. If the sequence has no elements, returns nil.

See Also: min()

Declaration

func min(by areInIncreasingOrder: (Element, Element) throws -> Bool) rethrows -> Element?

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
mutating func partition(by: (Element) throws -> Bool)

Reorders the elements of the collection such that all the elements that match the given predicate are after all the elements that do not match the predicate.

After partitioning a collection, there is a pivot index p where no element before p satisfies the belongsInSecondPartition predicate and every element at or after p satisfies belongsInSecondPartition.

In the following example, an array of numbers is partitioned by a predicate that matches elements greater than 30.

var numbers = [30, 40, 20, 30, 30, 60, 10]
let p = numbers.partition(by: { $0 > 30 })
// p == 5
// numbers == [30, 10, 20, 30, 30, 60, 40]

The numbers array is now arranged in two partitions. The first partition, numbers.prefix(upTo: p), is made up of the elements that are not greater than 30. The second partition, numbers.suffix(from: p), is made up of the elements that are greater than 30.

let first = numbers.prefix(upTo: p)
// first == [30, 10, 20, 30, 30]
let second = numbers.suffix(from: p)
// second == [60, 40]

belongsInSecondPartition: A predicate used to partition the collection. All elements satisfying this predicate are ordered after all elements not satisfying it. Returns: The index of the first element in the reordered collection that matches belongsInSecondPartition. If no elements in the collection match belongsInSecondPartition, the returned index is equal to the collection's endIndex.

Complexity: O(n)

Declaration

mutating func partition(by belongsInSecondPartition: (Element) throws -> Bool) rethrows -> Int

Declared In

MutableCollection
func prefix(_:)

Returns a subsequence, up to the specified maximum length, containing the initial elements of the collection.

If the maximum length exceeds the number of elements in the collection, the result contains all the elements in the collection.

let numbers = [1, 2, 3, 4, 5]
print(numbers.prefix(2))
// Prints "[1, 2]"
print(numbers.prefix(10))
// Prints "[1, 2, 3, 4, 5]"

maxLength: The maximum number of elements to return. maxLength must be greater than or equal to zero. Returns: A subsequence starting at the beginning of this collection with at most maxLength elements.

Declaration

func prefix(_ maxLength: Int) -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection
func prefix(through:)

Returns a subsequence from the start of the collection through the specified position.

The resulting subsequence includes the element at the position end. The following example searches for the index of the number 40 in an array of integers, and then prints the prefix of the array up to, and including, that index:

let numbers = [10, 20, 30, 40, 50, 60]
if let i = numbers.index(of: 40) {
    print(numbers.prefix(through: i))
}
// Prints "[10, 20, 30, 40]"

end: The index of the last element to include in the resulting subsequence. end must be a valid index of the collection that is not equal to the endIndex property. Returns: A subsequence up to, and including, the end position.

Complexity: O(1) See Also: prefix(upTo:)

Declaration

func prefix(through position: Int) -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection
func prefix(upTo:)

Returns a subsequence from the start of the collection up to, but not including, the specified position.

The resulting subsequence does not include the element at the position end. The following example searches for the index of the number 40 in an array of integers, and then prints the prefix of the array up to, but not including, that index:

let numbers = [10, 20, 30, 40, 50, 60]
if let i = numbers.index(of: 40) {
    print(numbers.prefix(upTo: i))
}
// Prints "[10, 20, 30]"

Passing the collection's starting index as the end parameter results in an empty subsequence.

print(numbers.prefix(upTo: numbers.startIndex))
// Prints "[]"

end: The "past the end" index of the resulting subsequence. end must be a valid index of the collection. Returns: A subsequence up to, but not including, the end position.

Complexity: O(1) See Also: prefix(through:)

Declaration

func prefix(upTo end: Int) -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection
func prefix(while:)

Returns a subsequence containing the initial elements until predicate returns false and skipping the remaining elements.

predicate: A closure that takes an element of the sequence as its argument and returns true if the element should be included or false if it should be excluded. Once the predicate returns false it will not be called again.

Complexity: O(n), where n is the length of the collection.

Declaration

func prefix(while predicate: (Element) throws -> Bool) rethrows -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection
func reduce(_:_:)

Returns the result of combining the elements of the sequence using the given closure.

Use the reduce(_:_:) method to produce a single value from the elements of an entire sequence. For example, you can use this method on an array of numbers to find their sum or product.

The nextPartialResult closure is called sequentially with an accumulating value initialized to initialResult and each element of the sequence. This example shows how to find the sum of an array of numbers.

let numbers = [1, 2, 3, 4]
let numberSum = numbers.reduce(0, { x, y in
    x + y
})
// numberSum == 10

When numbers.reduce(_:_:) is called, the following steps occur:

  1. The nextPartialResult closure is called with initialResult---0 in this case---and the first element of numbers, returning the sum: 1.
  2. The closure is called again repeatedly with the previous call's return value and each element of the sequence.
  3. When the sequence is exhausted, the last value returned from the closure is returned to the caller.

If the sequence has no elements, nextPartialResult is never executed and initialResult is the result of the call to reduce(_:_:).

Parameters: initialResult: The value to use as the initial accumulating value. initialResult is passed to nextPartialResult the first time the closure is executed. nextPartialResult: A closure that combines an accumulating value and an element of the sequence into a new accumulating value, to be used in the next call of the nextPartialResult closure or returned to the caller. Returns: The final accumulated value. If the sequence has no elements, the result is initialResult.

Declaration

func reduce<Result>(_ initialResult: Result, _ nextPartialResult: (Result, Element) throws -> Result) rethrows -> Result

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
mutating func reverse()

Reverses the elements of the collection in place.

The following example reverses the elements of an array of characters:

var characters: [Character] = ["C", "a", "f", "é"]
characters.reverse()
print(cafe.characters)
// Prints "["é", "f", "a", "C"]

Complexity: O(n), where n is the number of elements in the collection.

Declaration

mutating func reverse()

Declared In

MutableCollection
func reversed()

Returns an array containing the elements of this sequence in reverse order.

The sequence must be finite.

Complexity: O(n), where n is the length of the sequence.

Returns: An array containing the elements of this sequence in reverse order.

Declaration

func reversed() -> [Element]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
mutating func sort(by:)

Sorts the collection in place, using the given predicate as the comparison between elements.

When you want to sort a collection of elements that doesn't conform to the Comparable protocol, pass a closure to this method that returns true when the first element passed should be ordered before the second.

The predicate must be a strict weak ordering over the elements. That is, for any elements a, b, and c, the following conditions must hold:

  • areInIncreasingOrder(a, a) is always false. (Irreflexivity)
  • If areInIncreasingOrder(a, b) and areInIncreasingOrder(b, c) are both true, then areInIncreasingOrder(a, c) is also true. (Transitive comparability)
  • Two elements are incomparable if neither is ordered before the other according to the predicate. If a and b are incomparable, and b and c are incomparable, then a and c are also incomparable. (Transitive incomparability)

The sorting algorithm is not stable. A nonstable sort may change the relative order of elements for which areInIncreasingOrder does not establish an order.

In the following example, the closure provides an ordering for an array of a custom enumeration that describes an HTTP response. The predicate orders errors before successes and sorts the error responses by their error code.

enum HTTPResponse {
    case ok
    case error(Int)
}

var responses: [HTTPResponse] = [.error(500), .ok, .ok, .error(404), .error(403)]
responses.sort {
    switch ($0, $1) {
    // Order errors by code
    case let (.error(aCode), .error(bCode)):
        return aCode < bCode

    // All successes are equivalent, so none is before any other
    case (.ok, .ok): return false

    // Order errors before successes
    case (.error, .ok): return true
    case (.ok, .error): return false
    }
}
print(responses)
// Prints "[.error(403), .error(404), .error(500), .ok, .ok]"

Alternatively, use this method to sort a collection of elements that do conform to Comparable when you want the sort to be descending instead of ascending. Pass the greater-than operator (>) operator as the predicate.

var students = ["Kofi", "Abena", "Peter", "Kweku", "Akosua"]
students.sort(by: >)
print(students)
// Prints "["Peter", "Kweku", "Kofi", "Akosua", "Abena"]"

areInIncreasingOrder: A predicate that returns true if its first argument should be ordered before its second argument; otherwise, false.

Declaration

mutating func sort(by areInIncreasingOrder: (Element, Element) -> Bool)

Declared In

MutableCollection
func sorted(by:)

Returns the elements of the collection, sorted using the given predicate as the comparison between elements.

When you want to sort a collection of elements that don't conform to the Comparable protocol, pass a predicate to this method that returns true when the first element passed should be ordered before the second. The elements of the resulting array are ordered according to the given predicate.

The predicate must be a strict weak ordering over the elements. That is, for any elements a, b, and c, the following conditions must hold:

  • areInIncreasingOrder(a, a) is always false. (Irreflexivity)
  • If areInIncreasingOrder(a, b) and areInIncreasingOrder(b, c) are both true, then areInIncreasingOrder(a, c) is also true. (Transitive comparability)
  • Two elements are incomparable if neither is ordered before the other according to the predicate. If a and b are incomparable, and b and c are incomparable, then a and c are also incomparable. (Transitive incomparability)

The sorting algorithm is not stable. A nonstable sort may change the relative order of elements for which areInIncreasingOrder does not establish an order.

In the following example, the predicate provides an ordering for an array of a custom HTTPResponse type. The predicate orders errors before successes and sorts the error responses by their error code.

enum HTTPResponse {
    case ok
    case error(Int)
}

let responses: [HTTPResponse] = [.error(500), .ok, .ok, .error(404), .error(403)]
let sortedResponses = responses.sorted {
    switch ($0, $1) {
    // Order errors by code
    case let (.error(aCode), .error(bCode)):
        return aCode < bCode

    // All successes are equivalent, so none is before any other
    case (.ok, .ok): return false

    // Order errors before successes
    case (.error, .ok): return true
    case (.ok, .error): return false
    }
}
print(sortedResponses)
// Prints "[.error(403), .error(404), .error(500), .ok, .ok]"

You also use this method to sort elements that conform to the Comparable protocol in descending order. To sort your collection in descending order, pass the greater-than operator (>) as the areInIncreasingOrder parameter.

let students: Set = ["Kofi", "Abena", "Peter", "Kweku", "Akosua"]
let descendingStudents = students.sorted(by: >)
print(descendingStudents)
// Prints "["Peter", "Kweku", "Kofi", "Akosua", "Abena"]"

Calling the related sorted() method is equivalent to calling this method and passing the less-than operator (<) as the predicate.

print(students.sorted())
// Prints "["Abena", "Akosua", "Kofi", "Kweku", "Peter"]"
print(students.sorted(by: <))
// Prints "["Abena", "Akosua", "Kofi", "Kweku", "Peter"]"

areInIncreasingOrder: A predicate that returns true if its first argument should be ordered before its second argument; otherwise, false. Returns: A sorted array of the collection's elements.

See Also: sorted() MutatingVariant: sort

Declaration

func sorted(by areInIncreasingOrder: (Element, Element) -> Bool) -> [Element]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func split(_:omittingEmptySubsequences:whereSeparator:)

Returns the longest possible subsequences of the collection, in order, that don't contain elements satisfying the given predicate.

The resulting array consists of at most maxSplits + 1 subsequences. Elements that are used to split the sequence are not returned as part of any subsequence.

The following examples show the effects of the maxSplits and omittingEmptySubsequences parameters when splitting a string using a closure that matches spaces. The first use of split returns each word that was originally separated by one or more spaces.

let line = "BLANCHE:   I don't want realism. I want magic!"
print(line.characters.split(whereSeparator: { $0 == " " })
                     .map(String.init))
// Prints "["BLANCHE:", "I", "don\'t", "want", "realism.", "I", "want", "magic!"]"

The second example passes 1 for the maxSplits parameter, so the original string is split just once, into two new strings.

print(
    line.characters.split(
        maxSplits: 1, whereSeparator: { $0 == " " }
        ).map(String.init))
// Prints "["BLANCHE:", "  I don\'t want realism. I want magic!"]"

The final example passes false for the omittingEmptySubsequences parameter, so the returned array contains empty strings where spaces were repeated.

print(line.characters.split(omittingEmptySubsequences: false, whereSeparator: { $0 == " " })
                      .map(String.init))
// Prints "["BLANCHE:", "", "", "I", "don\'t", "want", "realism.", "I", "want", "magic!"]"

Parameters: maxSplits: The maximum number of times to split the collection, or one less than the number of subsequences to return. If maxSplits + 1 subsequences are returned, the last one is a suffix of the original collection containing the remaining elements. maxSplits must be greater than or equal to zero. The default value is Int.max. omittingEmptySubsequences: If false, an empty subsequence is returned in the result for each pair of consecutive elements satisfying the isSeparator predicate and for each element at the start or end of the collection satisfying the isSeparator predicate. The default value is true. isSeparator: A closure that takes an element as an argument and returns a Boolean value indicating whether the collection should be split at that element. Returns: An array of subsequences, split from this collection's elements.

Declaration

func split(maxSplits: Int = default, omittingEmptySubsequences: Bool = default, whereSeparator isSeparator: (Element) throws -> Bool) rethrows -> [MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func starts(with:by:)

Returns a Boolean value indicating whether the initial elements of the sequence are equivalent to the elements in another sequence, using the given predicate as the equivalence test.

The predicate must be a equivalence relation over the elements. That is, for any elements a, b, and c, the following conditions must hold:

  • areEquivalent(a, a) is always true. (Reflexivity)
  • areEquivalent(a, b) implies areEquivalent(b, a). (Symmetry)
  • If areEquivalent(a, b) and areEquivalent(b, c) are both true, then areEquivalent(a, c) is also true. (Transitivity)

Parameters: possiblePrefix: A sequence to compare to this sequence. areEquivalent: A predicate that returns true if its two arguments are equivalent; otherwise, false. Returns: true if the initial elements of the sequence are equivalent to the elements of possiblePrefix; otherwise, false. If possiblePrefix has no elements, the return value is true.

See Also: starts(with:)

Declaration

func starts<PossiblePrefix where PossiblePrefix : Sequence, Element == PossiblePrefix.Iterator.Element>(with possiblePrefix: PossiblePrefix, by areEquivalent: (Element, Element) throws -> Bool) rethrows -> Bool

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func suffix(_:)

Returns a subsequence, up to the given maximum length, containing the final elements of the collection.

If the maximum length exceeds the number of elements in the collection, the result contains all the elements in the collection.

let numbers = [1, 2, 3, 4, 5]
print(numbers.suffix(2))
// Prints "[4, 5]"
print(numbers.suffix(10))
// Prints "[1, 2, 3, 4, 5]"

maxLength: The maximum number of elements to return. The value of maxLength must be greater than or equal to zero. Returns: A subsequence terminating at the end of the collection with at most maxLength elements.

Complexity: O(n), where n is the length of the collection.

Declaration

func suffix(_ maxLength: Int) -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func suffix(from:)

Returns a subsequence from the specified position to the end of the collection.

The following example searches for the index of the number 40 in an array of integers, and then prints the suffix of the array starting at that index:

let numbers = [10, 20, 30, 40, 50, 60]
if let i = numbers.index(of: 40) {
    print(numbers.suffix(from: i))
}
// Prints "[40, 50, 60]"

Passing the collection's endIndex as the start parameter results in an empty subsequence.

print(numbers.suffix(from: numbers.endIndex))
// Prints "[]"

start: The index at which to start the resulting subsequence. start must be a valid index of the collection. Returns: A subsequence starting at the start position.

Complexity: O(1)

Declaration

func suffix(from start: Int) -> MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection

Conditionally Inherited Items

The initializers, methods, and properties listed below may be available on this type under certain conditions (such as methods that are available on Array when its elements are Equatable) or may not ever be available if that determination is beyond SwiftDoc.org's capabilities. Please open an issue on GitHub if you see something out of place!

Where Index : Strideable, IndexDistance == Index.Stride, Indices == CountableRange

var indices: CountableRange<Int>

The indices that are valid for subscripting the collection, in ascending order.

Declaration

var indices: CountableRange<Int> { get }

Declared In

RandomAccessCollection
func distance(from:to:)

Returns the distance between two indices.

Parameters: start: A valid index of the collection. end: Another valid index of the collection. If end is equal to start, the result is zero. Returns: The distance between start and end.

Complexity: O(1)

Declaration

func distance(from start: Int, to end: Int) -> Int.Stride

Declared In

RandomAccessCollection
func index(_:offsetBy:)

Returns an index that is the specified distance from the given index.

The following example obtains an index advanced four positions from an array's starting index and then prints the element at that position.

let numbers = [10, 20, 30, 40, 50]
let i = numbers.index(numbers.startIndex, offsetBy: 4)
print(numbers[i])
// Prints "50"

The value passed as n must not offset i beyond the bounds of the collection.

Parameters: i: A valid index of the collection. n: The distance to offset i. Returns: An index offset by n from the index i. If n is positive, this is the same value as the result of n calls to index(after:). If n is negative, this is the same value as the result of -n calls to index(before:).

Complexity: O(1)

Declaration

func index(_ i: Int, offsetBy n: Int.Stride) -> Int

Declared In

RandomAccessCollection
func index(after:)

Returns the position immediately after the given index.

i: A valid index of the collection. i must be less than endIndex. Returns: The index value immediately after i.

Declaration

func index(after i: Int) -> Int

Declared In

RandomAccessCollection
func index(before:)

Returns the position immediately after the given index.

i: A valid index of the collection. i must be greater than startIndex. Returns: The index value immediately before i.

Declaration

func index(before i: Int) -> Int

Declared In

RandomAccessCollection

Where Indices == DefaultBidirectionalIndices

var indices: DefaultBidirectionalIndices<UnsafeMutableBufferPointer<Element>>

The indices that are valid for subscripting the collection, in ascending order.

A collection's indices property can hold a strong reference to the collection itself, causing the collection to be non-uniquely referenced. If you mutate the collection while iterating over its indices, a strong reference can cause an unexpected copy of the collection. To avoid the unexpected copy, use the index(after:) method starting with startIndex to produce indices instead.

var c = MyFancyCollection([10, 20, 30, 40, 50])
var i = c.startIndex
while i != c.endIndex {
    c[i] /= 5
    i = c.index(after: i)
}
// c == MyFancyCollection([2, 4, 6, 8, 10])

Declaration

var indices: DefaultBidirectionalIndices<UnsafeMutableBufferPointer<Element>> { get }

Declared In

RandomAccessCollection , BidirectionalCollection

Where Indices == DefaultIndices

var indices: DefaultIndices<UnsafeMutableBufferPointer<Element>>

The indices that are valid for subscripting the collection, in ascending order.

A collection's indices property can hold a strong reference to the collection itself, causing the collection to be non-uniquely referenced. If you mutate the collection while iterating over its indices, a strong reference can cause an unexpected copy of the collection. To avoid the unexpected copy, use the index(after:) method starting with startIndex to produce indices instead.

var c = MyFancyCollection([10, 20, 30, 40, 50])
var i = c.startIndex
while i != c.endIndex {
    c[i] /= 5
    i = c.index(after: i)
}
// c == MyFancyCollection([2, 4, 6, 8, 10])

Declaration

var indices: DefaultIndices<UnsafeMutableBufferPointer<Element>> { get }

Declared In

MutableCollection , RandomAccessCollection , Collection , BidirectionalCollection

Where Iterator == Base.Iterator

func filter(_:)

Returns an array containing, in order, the elements of the sequence that satisfy the given predicate.

In this example, filter is used to include only names shorter than five characters.

let cast = ["Vivien", "Marlon", "Kim", "Karl"]
let shortNames = cast.filter { $0.characters.count < 5 }
print(shortNames)
// Prints "["Kim", "Karl"]"

includeElement: A closure that takes an element of the sequence as its argument and returns a Boolean value indicating whether the element should be included in the returned array. Returns: An array of the elements that includeElement allowed.

Declaration

func filter(_ isIncluded: (UnsafeMutableBufferPointer<Element>.Base.Iterator.Element) throws -> Bool) rethrows -> [UnsafeMutableBufferPointer<Element>.Base.Iterator.Element]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func makeIterator()

Returns an iterator over the elements of this sequence.

Declaration

func makeIterator() -> UnsafeMutableBufferPointer<Element>.Base.Iterator

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func map(_:)

Returns an array containing the results of mapping the given closure over the sequence's elements.

In this example, map is used first to convert the names in the array to lowercase strings and then to count their characters.

let cast = ["Vivien", "Marlon", "Kim", "Karl"]
let lowercaseNames = cast.map { $0.lowercaseString }
// 'lowercaseNames' == ["vivien", "marlon", "kim", "karl"]
let letterCounts = cast.map { $0.characters.count }
// 'letterCounts' == [6, 6, 3, 4]

transform: A mapping closure. transform accepts an element of this sequence as its parameter and returns a transformed value of the same or of a different type. Returns: An array containing the transformed elements of this sequence.

Declaration

func map<T>(_ transform: (UnsafeMutableBufferPointer<Element>.Base.Iterator.Element) throws -> T) rethrows -> [T]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence

Where Iterator == IndexingIterator

func makeIterator()

Returns an iterator over the elements of the collection.

Declaration

func makeIterator() -> IndexingIterator<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection

Where Iterator.Element : BidirectionalCollection

func joined()

Returns the elements of this collection of collections, concatenated.

In this example, an array of three ranges is flattened so that the elements of each range can be iterated in turn.

let ranges = [0..<3, 8..<10, 15..<17]

// A for-in loop over 'ranges' accesses each range:
for range in ranges {
  print(range)
}
// Prints "0..<3"
// Prints "8..<10"
// Prints "15..<17"

// Use 'joined()' to access each element of each range:
for index in ranges.joined() {
    print(index, terminator: " ")
}
// Prints: "0 1 2 8 9 15 16"

Returns: A flattened view of the elements of this collection of collections.

See Also: flatMap(_:), joined(separator:)

Declaration

func joined() -> FlattenBidirectionalCollection<UnsafeMutableBufferPointer<Element>>

Declared In

RandomAccessCollection, BidirectionalCollection

Where Iterator.Element : Collection

func joined()

Returns the elements of this collection of collections, concatenated.

In this example, an array of three ranges is flattened so that the elements of each range can be iterated in turn.

let ranges = [0..<3, 8..<10, 15..<17]

// A for-in loop over 'ranges' accesses each range:
for range in ranges {
  print(range)
}
// Prints "0..<3"
// Prints "8..<10"
// Prints "15..<17"

// Use 'joined()' to access each element of each range:
for index in ranges.joined() {
    print(index, terminator: " ")
}
// Prints: "0 1 2 8 9 15 16"

Returns: A flattened view of the elements of this collection of collections.

See Also: flatMap(_:), joined(separator:)

Declaration

func joined() -> FlattenCollection<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection

Where Iterator.Element : Comparable

func lexicographicallyPrecedes(_:)

Returns a Boolean value indicating whether the sequence precedes another sequence in a lexicographical (dictionary) ordering, using the less-than operator (<) to compare elements.

This example uses the lexicographicallyPrecedes method to test which array of integers comes first in a lexicographical ordering.

let a = [1, 2, 2, 2]
let b = [1, 2, 3, 4]

print(a.lexicographicallyPrecedes(b))
// Prints "true"
print(b.lexicographicallyPrecedes(b))
// Prints "false"

other: A sequence to compare to this sequence. Returns: true if this sequence precedes other in a dictionary ordering; otherwise, false.

Note: This method implements the mathematical notion of lexicographical ordering, which has no connection to Unicode. If you are sorting strings to present to the end user, use String APIs that perform localized comparison. See Also: lexicographicallyPrecedes(_:by:)

Declaration

func lexicographicallyPrecedes<OtherSequence where OtherSequence : Sequence, Element == OtherSequence.Iterator.Element>(_ other: OtherSequence) -> Bool

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
@warn_unqualified_access func max()

Returns the maximum element in the sequence.

This example finds the largest value in an array of height measurements.

let heights = [67.5, 65.7, 64.3, 61.1, 58.5, 60.3, 64.9]
let greatestHeight = heights.max()
print(greatestHeight)
// Prints "Optional(67.5)"

Returns: The sequence's maximum element. If the sequence has no elements, returns nil.

See Also: max(by:)

Declaration

@warn_unqualified_access func max() -> Element?

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
@warn_unqualified_access func min()

Returns the minimum element in the sequence.

This example finds the smallest value in an array of height measurements.

let heights = [67.5, 65.7, 64.3, 61.1, 58.5, 60.3, 64.9]
let lowestHeight = heights.min()
print(lowestHeight)
// Prints "Optional(58.5)"

Returns: The sequence's minimum element. If the sequence has no elements, returns nil.

See Also: min(by:)

Declaration

@warn_unqualified_access func min() -> Element?

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
mutating func sort()

Sorts the collection in place.

You can sort any mutable collection of elements that conform to the Comparable protocol by calling this method. Elements are sorted in ascending order.

The sorting algorithm is not stable. A nonstable sort may change the relative order of elements that compare equal.

Here's an example of sorting a list of students' names. Strings in Swift conform to the Comparable protocol, so the names are sorted in ascending order according to the less-than operator (<).

var students = ["Kofi", "Abena", "Peter", "Kweku", "Akosua"]
students.sort()
print(students)
// Prints "["Abena", "Akosua", "Kofi", "Kweku", "Peter"]"

To sort the elements of your collection in descending order, pass the greater-than operator (>) to the sort(by:) method.

students.sort(by: >)
print(students)
// Prints "["Peter", "Kweku", "Kofi", "Akosua", "Abena"]"

Declaration

mutating func sort()

Declared In

MutableCollection
func sorted()

Returns the elements of the collection, sorted.

You can sort any collection of elements that conform to the Comparable protocol by calling this method. Elements are sorted in ascending order.

The sorting algorithm is not stable. A nonstable sort may change the relative order of elements that compare equal.

Here's an example of sorting a list of students' names. Strings in Swift conform to the Comparable protocol, so the names are sorted in ascending order according to the less-than operator (<).

let students: Set = ["Kofi", "Abena", "Peter", "Kweku", "Akosua"]
let sortedStudents = students.sorted()
print(sortedStudents)
// Prints "["Abena", "Akosua", "Kofi", "Kweku", "Peter"]"

To sort the elements of your collection in descending order, pass the greater-than operator (>) to the sorted(by:) method.

let descendingStudents = students.sorted(by: >)
print(descendingStudents)
// Prints "["Peter", "Kweku", "Kofi", "Akosua", "Abena"]"

Returns: A sorted array of the collection's elements.

See Also: sorted(by:) MutatingVariant: sort

Declaration

func sorted() -> [Element]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence

Where Iterator.Element : Equatable

func contains(_:)

Returns a Boolean value indicating whether the sequence contains the given element.

This example checks to see whether a favorite actor is in an array storing a movie's cast.

let cast = ["Vivien", "Marlon", "Kim", "Karl"]
print(cast.contains("Marlon"))
// Prints "true"
print(cast.contains("James"))
// Prints "false"

element: The element to find in the sequence. Returns: true if the element was found in the sequence; otherwise, false.

Declaration

func contains(_ element: Element) -> Bool

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func elementsEqual(_:)

Returns a Boolean value indicating whether this sequence and another sequence contain the same elements in the same order.

At least one of the sequences must be finite.

This example tests whether one countable range shares the same elements as another countable range and an array.

let a = 1...3
let b = 1...10

print(a.elementsEqual(b))
// Prints "false"
print(a.elementsEqual([1, 2, 3]))
// Prints "true"

other: A sequence to compare to this sequence. Returns: true if this sequence and other contain the same elements in the same order.

See Also: elementsEqual(_:by:)

Declaration

func elementsEqual<OtherSequence where OtherSequence : Sequence, Element == OtherSequence.Iterator.Element>(_ other: OtherSequence) -> Bool

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func index(of:)

Returns the first index where the specified value appears in the collection.

After using index(of:) to find the position of a particular element in a collection, you can use it to access the element by subscripting. This example shows how you can modify one of the names in an array of students.

var students = ["Ben", "Ivy", "Jordell", "Maxime"]
if let i = students.index(of: "Maxime") {
    students[i] = "Max"
}
print(students)
// Prints "["Ben", "Ivy", "Jordell", "Max"]"

element: An element to search for in the collection. Returns: The first index where element is found. If element is not found in the collection, returns nil.

See Also: index(where:)

Declaration

func index(of element: Element) -> Int?

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection
func split(_:maxSplits:omittingEmptySubsequences:)

Returns the longest possible subsequences of the collection, in order, around elements equal to the given element.

The resulting array consists of at most maxSplits + 1 subsequences. Elements that are used to split the collection are not returned as part of any subsequence.

The following examples show the effects of the maxSplits and omittingEmptySubsequences parameters when splitting a string at each space character (" "). The first use of split returns each word that was originally separated by one or more spaces.

let line = "BLANCHE:   I don't want realism. I want magic!"
print(line.characters.split(separator: " ")
                     .map(String.init))
// Prints "["BLANCHE:", "I", "don\'t", "want", "realism.", "I", "want", "magic!"]"

The second example passes 1 for the maxSplits parameter, so the original string is split just once, into two new strings.

print(line.characters.split(separator: " ", maxSplits: 1)
                      .map(String.init))
// Prints "["BLANCHE:", "  I don\'t want realism. I want magic!"]"

The final example passes false for the omittingEmptySubsequences parameter, so the returned array contains empty strings where spaces were repeated.

print(line.characters.split(separator: " ", omittingEmptySubsequences: false)
                      .map(String.init))
// Prints "["BLANCHE:", "", "", "I", "don\'t", "want", "realism.", "I", "want", "magic!"]"

Parameters: separator: The element that should be split upon. maxSplits: The maximum number of times to split the collection, or one less than the number of subsequences to return. If maxSplits + 1 subsequences are returned, the last one is a suffix of the original collection containing the remaining elements. maxSplits must be greater than or equal to zero. The default value is Int.max. omittingEmptySubsequences: If false, an empty subsequence is returned in the result for each consecutive pair of separator elements in the collection and for each instance of separator at the start or end of the collection. If true, only nonempty subsequences are returned. The default value is true. Returns: An array of subsequences, split from this collection's elements.

Declaration

func split(separator: Element, maxSplits: Int = default, omittingEmptySubsequences: Bool = default) -> [MutableRandomAccessSlice<UnsafeMutableBufferPointer<Element>>]

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func starts(with:)

Returns a Boolean value indicating whether the initial elements of the sequence are the same as the elements in another sequence.

This example tests whether one countable range begins with the elements of another countable range.

let a = 1...3
let b = 1...10

print(b.starts(with: a))
// Prints "true"

Passing a sequence with no elements or an empty collection as possiblePrefix always results in true.

print(b.starts(with: []))
// Prints "true"

possiblePrefix: A sequence to compare to this sequence. Returns: true if the initial elements of the sequence are the same as the elements of possiblePrefix; otherwise, false. If possiblePrefix has no elements, the return value is true.

See Also: starts(with:by:)

Declaration

func starts<PossiblePrefix where PossiblePrefix : Sequence, Element == PossiblePrefix.Iterator.Element>(with possiblePrefix: PossiblePrefix) -> Bool

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence

Where Iterator.Element : Sequence

func joined()

Returns the elements of this sequence of sequences, concatenated.

In this example, an array of three ranges is flattened so that the elements of each range can be iterated in turn.

let ranges = [0..<3, 8..<10, 15..<17]

// A for-in loop over 'ranges' accesses each range:
for range in ranges {
  print(range)
}
// Prints "0..<3"
// Prints "8..<10"
// Prints "15..<17"

// Use 'joined()' to access each element of each range:
for index in ranges.joined() {
    print(index, terminator: " ")
}
// Prints: "0 1 2 8 9 15 16"

Returns: A flattened view of the elements of this sequence of sequences.

See Also: flatMap(_:), joined(separator:)

Declaration

func joined() -> FlattenSequence<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence
func joined(_:)

Returns the concatenated elements of this sequence of sequences, inserting the given separator between each element.

This example shows how an array of [Int] instances can be joined, using another [Int] instance as the separator:

let nestedNumbers = [[1, 2, 3], [4, 5, 6], [7, 8, 9]]
let joined = nestedNumbers.joined(separator: [-1, -2])
print(Array(joined))
// Prints "[1, 2, 3, -1, -2, 4, 5, 6, -1, -2, 7, 8, 9]"

separator: A sequence to insert between each of this sequence's elements. Returns: The joined sequence of elements.

See Also: joined()

Declaration

func joined<Separator where Separator : Sequence, Separator.Iterator.Element == Element.Iterator.Element>(separator: Separator) -> JoinedSequence<UnsafeMutableBufferPointer<Element>>

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence

Where Iterator.Element == String

func joined(_:)

Returns a new string by concatenating the elements of the sequence, adding the given separator between each element.

The following example shows how an array of strings can be joined to a single, comma-separated string:

let cast = ["Vivien", "Marlon", "Kim", "Karl"]
let list = cast.joined(separator: ", ")
print(list)
// Prints "Vivien, Marlon, Kim, Karl"

separator: A string to insert between each of the elements in this sequence. The default separator is an empty string. Returns: A single, concatenated string.

Declaration

func joined(separator: String = default) -> String

Declared In

MutableCollection, RandomAccessCollection, Collection, BidirectionalCollection, Sequence